“Mitsubishi FX3U 4DA Analog Output Module” has been added to your cart. View cart
Siemens 6ES7322 1BL00 0AA0
Description
Siemens 6ES7322 1BL00 0AA0 is the Digital Output Module of SIMATIC S7-300 series Programmable Logic Controller (PLC), The Digital output SM 322 module Siemens 6ES7322 1BL00 0AA0 has isolated, 32 Digital output (DO) 24 V DC, 0.5A, 1x 40-pole, Total current 4 A/group (16 A/module).
Specification of Siemens 6ES7322 1BL00 0AA0
| Part number | 6ES7322-1BL00-0AA0 |
| Supply voltage | |
| Load voltage L+ | |
| ● Rated value (DC) | 24 V |
| ● permissible range, lower limit (DC) | 20.4 V |
| ● permissible range, upper limit (DC) | 28.8 V |
| Input current | |
| from load voltage L+ (without load), max. | 160 mA |
| from backplane bus 5 V DC, max. | 110 mA |
| Power loss | |
| Power loss, typ. | 6.6 W |
| Digital outputs | |
| Number of digital outputs | 32 |
| Short-circuit protection | Yes; Electronic 1 A |
| ● Response threshold, typ. | 1.00Amipre |
| Limitation of inductive shutdown voltage to | L+ (-53 V) |
| Controlling a digital input | Yes |
| Switching capacity of the outputs | |
| ● on lamp load, max. | 5 W |
| Load resistance range | |
| ● lower limit | 48 Ω |
| ● upper limit | 4 kΩ |
| Output voltage | |
| ● for signal “1”, min. | L+ (-0.8 V) |
| Output current | |
| ● for signal “1” rated value | 0.5 A |
| ● for signal “1” permissible range for 0 to 40 °C, min. | 5 mA |
| ● for signal “1” permissible range for 0 to 40 °C, max. | 0.6 A |
| ● for signal “1” permissible range for 40 to 60 °C, min. | 5 mA |
| ● for signal “1” permissible range for 40 to 60 °C, max. | 0.6 A |
| ● for signal “1” minimum load current | 5 mA |
| ● for signal “0” residual current, max. | 0.5 mA |
| Output delay with resistive load | |
| ● “0” to “1”, max. | 100 µs |
| ● “1” to “0”, max. | 500 µs |
| Parallel switching of two outputs | |
| ● for uprating | No |
| ● for redundant control of a load | Yes; only outputs of the same group |
| Switching frequency | |
| ● with resistive load, max. | 100 Hz |
| ● with inductive load, max. | 0.5 Hz |
| ● with inductive load (acc. to IEC 60947-5-1, DC13), max. | 0.5 Hz |
| ● on lamp load, max. | 10 Hz |
| Total current of the outputs (per group) | |
| horizontal installation | |
| — up to 40 °C, max. | 4:00 AM |
| — up to 60 °C, max. | 3:00 AM |
| vertical installation | |
| — up to 40 °C, max. | 2:00 AM |
| Cable length | |
| ● shielded, max. | 1 000 m |
| ● unshielded, max. | 600 m |
| Interrupts/diagnostics/status information | |
| Alarms | No |
| Diagnostics function | No |
| Alarms | |
| ● Diagnostic alarm | No |
| Diagnoses | |
| ● Diagnostic information readable | No |
| ● Wire-break | No |
| ● Short-circuit | No |
| ● missing load voltage | No |
| Diagnostics indication LED | |
| ● Rated load voltage PWR (green) | No |
| ● Fuse OK FSG (green) | No |
| ● Group error SF (red) | No |
| ● Status indicator digital output (green) | Yes; per channel |
| ● Channel fault indicator F (red) | No |
| Potential separation | |
| Potential separation digital outputs | |
| ● between the channels | Yes |
| ● between the channels, in groups of | 8 |
| ● between the channels and backplane bus | Yes; Optocoupler |
| Isolation | |
| Isolation tested with | 500 V DC |
| connection method | |
| required front connector | 40-pin |
| Dimensions | |
| Width | 40 mm |
| Height | 125 mm |
| Depth | 120 mm |
| Weights | |
| Weight, approx. | 260 g |
Be the first to review “Siemens 6ES7322 1BL00 0AA0”
Related products
-
Sale!
Mitsubishi FX2N 2DA Mitsubishi Analog Output Module
Original price was: 13,000.00৳ .12,000.00৳ Current price is: 12,000.00৳ . Add to cart -
Sale!
FX3G 485 BD Mitsubishi Modbus Module
Original price was: 6,500.00৳ .5,000.00৳ Current price is: 5,000.00৳ . Add to cart -
Sale!
FX3U 485 BD Mitsubishi Modbus module
Original price was: 7,000.00৳ .4,500.00৳ Current price is: 4,500.00৳ . Add to cart -
Sale!
Mitsubishi FX2N 4AD Mitsubishi Analog Input Module
Original price was: 15,000.00৳ .13,000.00৳ Current price is: 13,000.00৳ . Add to cart
Reviews
There are no reviews yet.