Siemens 6ES7322 1BL00 0AA0

Description

Siemens 6ES7322 1BL00 0AA0 is the Digital Output Module of SIMATIC S7-300 series Programmable Logic Controller (PLC), The Digital output SM 322 module Siemens 6ES7322 1BL00 0AA0 has isolated, 32 Digital output (DO) 24 V DC, 0.5A, 1x 40-pole, Total current 4 A/group (16 A/module).

Download Manual

Others Module

Specification of Siemens 6ES7322 1BL00 0AA0

 

Part number 6ES7322-1BL00-0AA0
Supply voltage
Load voltage L+
●   Rated value (DC) 24 V
●   permissible range, lower limit (DC) 20.4 V
●   permissible range, upper limit (DC) 28.8 V
Input current
from load voltage L+ (without load), max. 160 mA
from backplane bus 5 V DC, max. 110 mA
Power loss
Power loss, typ. 6.6 W
Digital outputs
Number of digital outputs 32
Short-circuit protection Yes; Electronic 1 A
●   Response threshold, typ. 1.00Amipre
Limitation of inductive shutdown voltage to L+ (-53 V)
Controlling a digital input Yes
Switching capacity of the outputs
●   on lamp load, max. 5 W
Load resistance range
●   lower limit 48 Ω
●   upper limit 4 kΩ
Output voltage
●   for signal “1”, min. L+ (-0.8 V)
Output current
●   for signal “1” rated value 0.5 A
●   for signal “1” permissible range for 0 to 40 °C, min. 5 mA
●   for signal “1” permissible range for 0 to 40 °C, max. 0.6 A
●   for signal “1” permissible range for 40 to 60 °C, min. 5 mA
●   for signal “1” permissible range for 40 to 60 °C, max. 0.6 A
●   for signal “1” minimum load current 5 mA
●   for signal “0” residual current, max. 0.5 mA
Output delay with resistive load
●   “0” to “1”, max. 100 µs
●   “1” to “0”, max. 500 µs
Parallel switching of two outputs
●   for uprating No
●   for redundant control of a load Yes; only outputs of the same group
Switching frequency
●   with resistive load, max. 100 Hz
●   with inductive load, max. 0.5 Hz
●   with inductive load (acc. to IEC 60947-5-1, DC13), max. 0.5 Hz
●   on lamp load, max. 10 Hz
Total current of the outputs (per group)
horizontal installation
— up to 40 °C, max. 4:00 AM
— up to 60 °C, max. 3:00 AM
vertical installation
— up to 40 °C, max. 2:00 AM
Cable length
●   shielded, max. 1 000 m
●   unshielded, max. 600 m
Interrupts/diagnostics/status information
Alarms No
Diagnostics function No
Alarms
●   Diagnostic alarm No
Diagnoses
●   Diagnostic information readable No
●   Wire-break No
●   Short-circuit No
●   missing load voltage No
Diagnostics indication LED
●   Rated load voltage PWR (green) No
●   Fuse OK FSG (green) No
●   Group error SF (red) No
●   Status indicator digital output (green) Yes; per channel
●   Channel fault indicator F (red) No
Potential separation
Potential separation digital outputs
●   between the channels Yes
●   between the channels, in groups of 8
●   between the channels and backplane bus Yes; Optocoupler
Isolation
Isolation tested with 500 V DC
connection method
required front connector 40-pin
Dimensions
Width 40 mm
Height 125 mm
Depth 120 mm
Weights
Weight, approx. 260 g

 

 

Reviews

There are no reviews yet.

Be the first to review “Siemens 6ES7322 1BL00 0AA0”

error: Content is protected !!