Weintek HMI Programming Cable USB Micro

Description

The Weintek HMI Programming Cable USB Micro is used to connect a Weintek TK6071 HMI to a computer for programming, configuration, and project transfer. The Weintek TK6071 HMI features a USB-Micro port, which is a common port type for smaller devices. If you need mt6070ih programming cable or Weintek HMI Programming Cable USB Micro Cable price in BD you  can contact us Via WhatsApp. Here are the details regarding this cable:

Weintek TK6071/MT6071iP/MT6070IH Weintek HMI Programming Cable USB Micro

1. Cable Type:
   • USB Type A to USB Micro-B cable.
   • The USB Type A end is connected to your computer, while the USB Micro-B end is plugged into the USB-Micro port on the HMI.
2. Use Case:
   • This cable is used for direct connection between the Weintek TK6071 HMI and a computer for programming, downloading, and uploading projects, as well as firmware updates.
   • It is compatible with Weintek’s EasyBuilder Pro programming software.
3. Driver Requirements:
   • When the HMI is connected via USB, your computer may automatically prompt to install the necessary USB driver.
   • If drivers are not installed automatically, you can download them from the Weintek official website.
4. Cable Length:
   • The cable typically has a length of 1 to 2 meters, providing enough reach for easy connectivity while programming.

Others Cable

Installation and Connection Instructions

1. Connect the Cable:
   • Plug the USB Type A connector into the USB port on your PC.
   • Connect the USB Micro-B end into the USB-Micro port on the Weintek TK6071 HMI.
2. Driver Installation:
   • Once the HMI is connected to the PC, your computer may detect it and prompt you to install drivers for the USB connection.
   • If the drivers aren’t installed automatically, visit the Weintek support site to download and install the appropriate USB drivers.
3. Software Setup:
   • Launch EasyBuilder Pro software, which is the programming tool used for Weintek HMIs.
   • The software should automatically detect the connected HMI through the USB connection.
4. Programming and Configuration:
   • After establishing the connection, you can begin programming, configuring, and transferring projects to the TK6071 HMI using EasyBuilder Pro.

The USB-Micro programming cable for the Weintek TK6071 HMI is a USB Type A to USB Micro-B cable used for connecting the HMI to a PC for programming purposes. It works with EasyBuilder Pro software, allowing users to create, modify, and upload projects to the HMI. Make sure to install any necessary USB drivers for proper communication between the HMI and the computer.