USB LG XGB LS PLC Programming Cable

Description

The USB LG XGB LS PLC Programming Cable is used for connecting a PC to an LG (LS) XGB, XBM, XGK, Master K series PLC for programming, monitoring, and troubleshooting purposes. This cable typically features a USB connector on one end for connecting to a computer and a specific connector compatible with the LG (LS) XGB PLC’s communication port on the other end. If you need USB LG XGB LS PLC Programming Cable Price in BD Or LS PLC Communication Cable price in BD you can contact BAT Power Solution Via WhatsApp: +8801713722455

LS (LSIS or LS Electric) PLC programming cables are essential for connecting a computer to LS PLCs for tasks such as programming, configuration, and monitoring. LS offers a variety of cables to match the different PLC series and connection types, including XGB, XBM, and XBC series PLCs. Here are the commonly used LS PLC programming cables:

Key Features and Functions USB LG XGB LS PLC Programming Cable

1. USB to Serial Conversion:
   • The cable likely contains a built-in USB-to-serial converter that enables communication between the USB port of the computer and the serial communication interface of the PLC.
2. Compatibility:
   • Designed to work with LG (LS) XGB PLCs, it is typically used with programming software such as KGLWIN or XG5000, which are the official programming environments for LG/LS PLCs.
3. Communication Protocol:
   • It supports standard communication protocols used by LG/LS PLCs, such as RS232 or RS485, depending on the PLC model.
4. Plug-and-Play:
   • Modern versions of this cable typically come with drivers that allow plug-and-play functionality. Once the driver is installed, the computer should recognize the cable as a communication port (COM port), and the programming software can use this port for PLC communication.

Applications

• Programming: Used for downloading and uploading programs to and from the PLC.
• Monitoring: Allows real-time monitoring of the PLC status and data during operation.
• Troubleshooting: Enables diagnostic tasks, such as reading fault codes or error states.

Connection Setup USB LG XGB LS PLC Programming Cable

1. Connect the USB end of the cable to the PC.
2. Install the driver (if required). Some cables come with driver software that needs to be installed for the PC to recognize the cable properly.
3. Connect the PLC end of the cable to the LG (LS) XGB PLC’s programming port.
4. Open the PLC programming software (e.g., KGLWIN or XG5000), select the appropriate COM port, and begin programming or monitoring the PLC.

Notes

• Ensure that the correct driver for the USB-to-serial chip in the cable (usually FTDI or Prolific) is installed on the computer.
• Use the correct communication settings (baud rate, parity, stop bits, etc.) in the software to establish communication with the PLC.

Programming Software:

• KGL WIN and XG5000: LS PLCs are programmed using KGL WIN (for older models) or XG5000 software (for newer XGB and XGK series). Make sure to select the correct communication port in the software that matches your connected cable (e.g., COM port for RS-232 or USB port).

For LS PLC programming, the right cable depends on your PLC model and the available interface on your computer. The XGK-CBU is suitable for RS-232 connections for older PLCs, while the USB-SC09A-LS offers USB connectivity for newer PLCs. Always check your PLC documentation for compatibility, and ensure you have the necessary drivers installed for a successful connection.

Others Cable