USB-FBS-232P0-9F Fatek plc communication cable

Description

The USB-FBS-232P0-9F Fatek plc communication cable is used to program Fatek FACON FBE-MU/MA/MC Series Programmable Logic Controller (PLC), some information of the FATEK FACON PLC cable Fatek plc communication cable as given below as,

✔Length: 2.5m（USB-15pins male port）

✔Purpose: USB port connection Fatek FACON FBE- MU/MA/MC series PLC programming cable

✔Nickel-plated connection plug with low resistance, reduces plug friction, and anti-oxidation protection, improves connection, wire crust applied insulated PVC meets POHS standards

✔ Eco-friendly PVC pure copper process, fast transfer rate, good electrical and thermal conductivity, high strength, low resistance, good flexibility and low energy consumption and the cable is soft, can reduce signal loss, it does not affect the communication quality even in winter. Working temperature is -30°C to 70°C

✔Dust and water resistant adapter The adapter makes the communication more stable, internal led light, online monitoring and debugging, 2.5m cable length solves the long distance connection problem.

If you want to USB-FBS-232P0-9F Fatek plc communication cable price in Bangladesh, you can contact BAT Power Solution (BATPS).

Specification of USB-FBS-232P0-9F Fatek plc communication cable

Brand AMSAMOTION

Connector type USB

Cable type USB

Special features are water resistant

The connecting gender is male to male

Item condition new

Another cable FBS Fatek

To program a Fatek PLC, you need a specific programming cable that connects your PC to the PLC for configuration, programming, monitoring, and troubleshooting. Fatek PLCs, like the FBs series or B1/B1z series, typically use RS-232, USB, or RS-485 communication depending on the model.

Common Fatek PLC Programming Cables

1. FBs-CB3M Programming Cable (RS-232)
   • Cable Type: RS-232 communication cable.
   • Use Case: Used to connect a PC to Fatek FBs series PLCs via the RS-232 interface.
   • Connector Type: Typically has a DB9 female connector for the computer side and a mini-DIN 8-pin connector for the PLC.
   • Length: Usually around 3 meters.
   • Requirements: A serial port on your computer, or if using a newer PC without a serial port, you can use an RS-232 to USB adapter.
2. FBs-232P0-9F Programming Adapter
   • Cable Type: RS-232 to TTL level adapter.
   • Use Case: Connects a PC to the Fatek PLC’s programming port through RS-232, providing a reliable communication link.
   • Connector Type: DB9 female on the PC side and a mini-DIN 8-pin for the PLC.
3. USB-232 Programming Cable (USB to RS-232)
   • Cable Type: USB to RS-232 cable, often used as an alternative for PCs without an RS-232 port.
   • Use Case: This cable allows you to use a standard RS-232 port through a USB interface. This is helpful when programming Fatek PLCs with only a USB port available on the PC.
   • Connector Type: USB Type-A on the PC side and DB9 male on the PLC side (used together with RS-232 cables like FBs-CB3M).
   • Driver Installation: Requires driver installation, which can typically be downloaded from the manufacturer’s website.
4. FBs-USBP0-9F Programming Adapter (USB)
   • Cable Type: USB programming adapter.
   • Use Case: Provides a direct USB connection to Fatek FBs series PLCs.
   • Connector Type: USB Type-A on the PC side, and a mini-DIN 8-pin on the PLC side.
   • Driver Requirement: Requires a USB driver, which is available on the Fatek official website.
5. FBs-CM25E Ethernet Module Cable
   • Cable Type: Ethernet cable.
   • Use Case: If your Fatek PLC is equipped with an Ethernet module, you can use a standard Ethernet cable to connect for programming or monitoring.
   • Connector Type: RJ-45 connectors at both ends.
   • Configuration: Ensure that the PLC and PC are configured with compatible IP addresses.