USB-ETH Siemens PLC Programming Cable & Mitsubishi

Description

The USB-ETH Siemens PLC Programming Cable & Mitsubishi is an Ethernet to USB adapter specifically designed for programming and communication between a PC and Siemens or Mitsubishi PLCs. This cable allows you to connect the PLC to your PC for programming, monitoring, and data exchange via an Ethernet interface, using the USB port on the computer. If you need USB-ETH Cable in BD you can contact US Via WhatsAPP/CALL at BAT Power Solution.

Others Cable

Key Features USB-ETH Siemens PLC Programming Cable & Mitsubishi

• Ethernet Communication: Provides an Ethernet interface to connect Siemens or Mitsubishi PLCs to a PC using a USB port.
• USB to Ethernet Converter: Converts USB signals to Ethernet (RJ45), enabling Ethernet-based communication for programming and data transfer.
• Broad PLC Support: Supports various Siemens and Mitsubishi PLCs with Ethernet capabilities.
• Plug-and-Play Setup: Easy installation and setup for fast communication between PC and PLC.

Cable Specifications

1. PC End:
   • USB connector (Type-A) that plugs into the computer’s USB port.
2. PLC End:
   • Ethernet (RJ45) connector to connect to the PLC’s Ethernet port.
3. Supported Protocols:
   • Ethernet communication, compatible with TCP/IP protocols for programming and data exchange.

Supported Models USB-ETH Siemens PLC Programming Cable & Mitsubishi

• Siemens S7-1200, S7-1500: These models support Ethernet communication, and the USB-ETH cable can be used to connect a PC to these PLCs for programming and data transfer.
• Siemens S7-300, S7-400 (with Ethernet modules): If an Ethernet module is present, this cable can also be used to communicate with these models.

1. 1. Siemens PLC

• S7-300 Series
• S7-200 Savvy Series
• S7-1200 Series
• S7-1500 Series
• Used for uploading, downloading programs, and online observing and debugging.
  2. Siemens Touch Panels
• Smart 700IE V3
• Smart 1000IE V3
  Suitable for program upload/download, online observing, and debugging.
  3. Mitsubishi PLCs:
• FX5U
  Compatible with other PLCs or touch screens with a standard Ethernet interface.
  Enables programming, uploading/downloading, and online checking and investigating.

Connection Setup

1. Connect the USB End of the USB-ETH cable to your PC’s USB port.
2. Connect the Ethernet End to the Ethernet port on the PLC (Siemens or Mitsubishi).
3. Open the appropriate programming software:
   • Siemens: TIA Portal or Step 7 for Siemens PLCs.
   • Mitsubishi: GX Works 3 for Mitsubishi PLCs.
4. Configure the Ethernet communication settings (such as IP addresses and subnet masks) to establish a connection between the PC and the PLC.
5. Program, monitor, or transfer data between the PC and the PLC using the software.

Software Used of USB-ETH-Siemens-PLC-Programming-Cable-Mitsubishi

• Siemens:
  • TIA Portal: For programming and configuring Siemens S7-1200, S7-1500, and other Ethernet-compatible PLCs.
  • Step 7: For Siemens S7-300 and S7-400 PLCs.
• Mitsubishi:
  • GX Works 3 Used for programming of Mitsubishi FX5U series PLC.

Driver Installation

• The USB-ETH cable may require the installation of a USB-to-Ethernet driver on your computer. This driver will allow your PC to recognize the cable as an Ethernet interface for communication with the PLC.

Troubleshooting Tips

• IP Configuration: Ensure that the IP addresses and subnet masks of the PLC and PC are correctly set for Ethernet communication.
• Driver Installation: If the cable is not recognized by your PC, verify that the required drivers are installed.
• Cable Connection: Ensure the cable is properly connected to both the PC and PLC, and that the Ethernet port on the PLC is active.

Important Notes

• Ensure that the PLC you are working with supports Ethernet communication. Some PLC models require an additional Ethernet module.
• Correctly configuring the IP addresses in both the PLC and PC is critical for successful communication.