TK6070-FP0 Weintek HMI to Panasonic PLC Cable

Description

The TK6070-FP0 Weintek HMI to Panasonic PLC Cable is specifically designed for communication between a Weintek HMI (such as the TK6070 series) and a Panasonic PLC. This cable enables data exchange, real-time monitoring, and control of the Panasonic PLC directly from the Weintek HMI, If you need to TK6070-FP0 Weintek HMI to Panasonic PLC Communication Cable  Cable, then you can contact BAT Power Solution Via Call/WhatsApp: +8801713722455.

Key Features TK6070-FP0 Weintek HMI to Panasonic PLC Cable

• HMI to Panasonic PLC Communication: Designed for interfacing Weintek HMIs with Panasonic PLCs, providing a reliable connection for automation and control applications.
• Supports RS232 or RS485 Communication: Depending on the models of the Weintek HMI and the Panasonic PLC, the cable supports RS232 or RS485 protocols for data transmission.
• Plug-and-Play Connection: The cable simplifies the connection between the HMI and PLC, reducing the setup time for communication.

Cable Specifications

1. Weintek HMI End:
   • The connector is designed to interface with the communication port of the Weintek HMI (typically RS232 or RS485), ensuring a stable connection.
2. Panasonic PLC End:
   • The other end connects to the communication port of the Panasonic PLC (RS232 or RS485), depending on the PLC’s communication requirements.
3. Supported Communication Protocols:
   • RS232 or RS485 communication protocols, allowing flexibility based on the specific Panasonic PLC model.

Supported Weintek HMI Models

• Weintek TK6070 Series HMIs:
  • TK6070iH, TK6070iP, TK6071iP, and other similar models that support RS232 or RS485 communication.

Supported Panasonic PLC Models

• Panasonic FP Series PLCs:
  • FP0, FP1, FP2, FP-X, FPΣ (FP Sigma), and other models from the FP Series. These models typically feature RS232 or RS485 communication ports.

Connection Setup Weintek HMI to Panasonic PLC Cable

1. Connect the Weintek HMI End of the TK6070-FPO cable to the communication port of the Weintek TK6070 HMI.
2. Connect the Panasonic PLC End to the communication port on the Panasonic FP Series PLC.
3. Open EasyBuilder Pro (Weintek’s HMI programming software) and configure the communication settings such as baud rate, parity, data bits, and stop bits to match those of the Panasonic PLC.
4. Verify the connection to ensure that the HMI is communicating with the PLC, allowing you to monitor and control the PLC from the HMI interface. Others Cable