Siemens USB PPI Cable s7 200 Programming Cable

Description

The Siemens USB PPI Cable s7 200 Programming Cable is used for programming and communication between a PC and the Siemens S7-200 PLC. This cable is essential for establishing communication for tasks like programming, monitoring, and troubleshooting using Siemens Step 7 Micro/Win software. It serves as a replacement for the older RS232 PPI cables by using a modern USB interface. If you need USB PPI Cable s7 200 PLC Programming Cable/siemens s7 200 communication cable Price in Bangladesh you can Contact BAT Power Solution Via email/WhatsApp. 01713722455

Key Features USB to PPI Cable Siemens s7 200 communication cable

1. USB to PPI Communication:
   • The USB PPI Cable connects the USB port of your PC to the PPI (Point-to-Point Interface) port on the Siemens S7-200 PLC.
   • This cable supports PPI protocol, which is used for communication with the S7-200 PLC series.
2. Driver Installation:
   • A USB driver is required to recognize the cable on the PC. The driver creates a virtual COM port that is used for communication between the PC and the S7-200 PLC. This driver can be obtained from Siemens or typically comes with the cable.
3. Supported Software:
   • The USB PPI Cable works with Siemens STEP 7 Micro/Win software, which is used for programming, monitoring, and diagnosing the S7-200 PLC.

Applications

• Programming: Upload/download programs between your PC and the S7-200 PLC using STEP 7 Micro/Win.
• Monitoring: Monitor real-time operations, view data, and perform diagnostics on the PLC.
• Troubleshooting: Detect and resolve errors or issues with the PLC system through the communication link.

Connection Setup Siemens USB PPI Cable s7 200 Programming Cable

1. Connect the USB end of the USB PPI cable to your PC.
2. Install the USB driver if it is not automatically detected by your operating system. The driver creates a virtual COM port, which will be used in STEP 7 Micro/Win.
3. Connect the other end of the cable (the PPI side) to the PPI programming port of the S7-200 PLC.
4. Open STEP 7 Micro/Win software on your PC.
5. In the communication settings of STEP 7 Micro/Win, select the COM port that corresponds to the virtual COM port created by the USB PPI cable.
6. Begin programming, uploading/downloading projects, or monitoring the PLC.

Supported Siemens Devices

• Siemens S7-200 PLC series, including models:
  • CPU 221
  • CPU 222
  • CPU 224
  • CPU 226

Important Considerations

• Ensure that the USB driver is installed correctly and the correct COM port is selected in STEP 7 Micro/Win.
• Make sure the PPI protocol is properly configured in the software for smooth communication with the PLC.
• Ensure that the PLC is powered on and ready to communicate when connecting the cable.

Troubleshooting Tips:

• If the communication fails, check if the correct COM port is selected in the software.
• Verify that the USB driver is installed correctly and that no conflicts exist with other devices using COM ports.
• Ensure that the cable is securely connected at both the USB and PLC ends..

Others Cable