Siemens logo plc communication cable USB Logo

Description

The Siemens logo plc communication cable USB Logo for Siemens LOGO! PLC (often referred to as the USB-Logo! Cable) is a special cable used to connect a PC to Siemens LOGO! series PLCs for programming, monitoring, and troubleshooting. This cable is designed to facilitate the connection between modern computers (via USB) and LOGO! PLCs. If you need to siemens logo plc programming cable price in BD or siemens logo plc communication cable price in BD You can contact BAT Power Solution Via WhatsApp: +8801713722455.

Key Features of Siemens logo plc communication cable USB Logo

1. USB to Proprietary Interface:
   • The USB-Logo! Cable allows communication between the USB port of a PC and the Siemens LOGO! PLC’s programming port, which uses a proprietary interface.
2. Driver Installation:
   • This cable requires a driver to be installed on your computer to create a virtual COM port, which the LOGO! Soft Comfort programming software can use for communication.
3. Supported Software:
   • The LOGO! Soft Comfort software is Siemens’ dedicated programming environment for the LOGO! PLC series. The cable is used to download and upload programs, as well as monitor and debug the system.
4. Plug-and-Play Functionality:
   • The USB-Logo cable is designed for plug-and-play use. Once connected, the driver is automatically installed (or manually if needed), and the LOGO! Soft Comfort software can immediately recognize the device through the virtual COM port.
5. Full Duplex Communication:
   • The cable supports full duplex communication for simultaneous sending and receiving of data, allowing real-time monitoring and control of the LOGO! PLC.

Applications

• Programming: Upload and download programs from the PC to the LOGO! PLC.
• Monitoring: Real-time monitoring of the PLC’s status and I/O using LOGO! Soft Comfort.
• Troubleshooting: Use the cable to diagnose issues in the PLC, read error logs, and modify the ladder logic as necessary.

Connection Setup

1. Connect the USB end to your computer.
2. Install the driver for the USB cable (if not automatically installed). Drivers can typically be found on the included CD or downloaded from Siemens’ official website.
3. Connect the other end to the LOGO! PLC’s programming port.
4. Open LOGO! Soft Comfort on your computer.
5. Select the appropriate COM port that was assigned to the cable.
6. Begin programming, monitoring, or troubleshooting the LOGO! PLC.

Supported Siemens logo plc communication cable USB Logo

• LOGO! 8
• LOGO! 6/7
• Any other Siemens LOGO! PLC that supports USB communication via this cable.

Important Considerations

• Ensure you have the correct driver installed to ensure smooth communication between the PC and the LOGO! PLC.
• Make sure to set the correct communication parameters (COM port and baud rate) in LOGO! Soft Comfort.

others Cable