Siemens-6ES7153-2BA10-0XB0-ET200m-Profinet
Siemens-6ES7153-2BA10-0XB0-ET200m-Profinet

Siemens 6ES7153-2BA10-0XB0 ET200m Profinet

6ES7153-2BA10-0XB0 ET200m Profinet

Model/Part Number: 6ES7153-2BA10-0XB0

Brand: Siemens

Made in China

Ask Price  Call/WhatsApp: +8801713-722455

Category: Tags: , , ,

Description

The Siemens 6ES7153-2BA10-0XB0 ET200m PROFINET is a 153-2 High Feature Interface Module, used in Siemens S7 automation systems to connect ET 200M I/O modules to a PROFINET network. This module is well-suited for high-performance and complex automation tasks. If you need to Siemens 6ES7153-2BA10-0XB0 ET200m Profinet Module price in Bangladesh, you can contact BAT Power Solution via CALL/WhatsApp: +8801713722455

Key Features of Siemens 6ES7153-2BA10-0XB0 ET200m Profinet

  1. PROFINET Compatibility:
    • Enables communication over PROFINET, a widely-used Industrial Ethernet protocol.
  2. High Feature Module:
    • Supports advanced functions, including diagnostics and time-stamped data.
  3. I/O Modules Supported:
    • Compatible with Siemens S7-300 signal modules and other ET 200M I/O modules.
  4. Redundancy Support:
    • Facilitates system reliability by supporting S2 redundancy, ensuring minimal downtime in case of network or module failure.
  5. Diagnostics:
    • Offers comprehensive diagnostics for quick identification of errors and system status.

others products

Technical Specifications of Siemens 6ES7153-2BA10-0XB0 ET200m Profinet

Specification Details
Article Number 6ES7153-2BA10-0XB0
Network Protocol PROFINET
Max Number of I/O Modules Up to 12 per station
Redundancy Support S2 redundancy
Addressing Automatic or manual configuration
Diagnostics Extensive via PROFINET
Power Supply Voltage 24V DC
Operating Temperature Range 0°C to +60°C
Mounting Type DIN Rail

 

Product type designation IM 153-2 DP HF V6.0.0
Firmware version 801Eh
Vendor identification (VendorID)
Supply voltage
Rated value (DC) 24 V
permissible range, lower limit (DC) 20.4 V
permissible range, upper limit (DC) 28.8 V
external protection for power supply lines (recommendation) 2,5 A
Mains buffering
●   Mains/voltage failure stored energy time 5 ms
Input current
Current consumption, max. 650 mA; with 24 V DC supply 3 A
Inrush current, typ. 0.1 A²·s
I²t
Output current
for backplane bus (5 V DC), max. 1.5 A
Power loss
Power loss, typ. 5.5 W
Address area
Addressing volume
●   Inputs 244 byte
●   Outputs 244 byte
Hardware configuration
number of modules per DP device interface, max. 12
Time stamping
Accuracy 1 ms; 1 ms at up to 8 modules; 10 ms at up to 12 modules
Number of message buffers 15
Messages per message buffer 20
Number of stampable digital inputs, max. 128; Max. 128 signals/station; max. 32 signals/slot
Time format RFC 1119
Time resolution 0.466 ns
Time interval for transmitting the message buffer if a message is present 1 000 ms
Time stamp on signal change rising / falling edge as signal entering or exiting
Interfaces
Transmission procedure RS 485
Transmission rate, max. 12 Mbit/s
1. Interface
automatic detection of transmission rate Yes
Interface types
●   Output current of the interface, max. 70 mA
●   Design of the connection 9-pin sub D socket
1st interface / PROFIBUS DP device / header
●   GSD file SI05801E.GSG
●   automatic baud rate search Yes
Protocols
Bus protocol/transmission protocol PROFIBUS DP to EN 50170
Protocols (Ethernet)
●   TCP/IP No
PROFIBUS DP
●   Number of node addresses, max. 1 to 125 permitted
Services
— SYNC capability Yes
— FREEZE capability Yes
— Direct data exchange (slave-to-slave communication) Yes; as publisher with all IO, as subscriber with F-IO only
Potential separation
Potential separation exists Yes
Isolation
Isolation tested with Isolation voltage 500 V
Degree and class of protection
IP degree of protection IP20
Ambient conditions
Ambient temperature during operation
●   min. 0 °C
●   max. 60 °C
●   horizontal installation, min. 0 °C
●   horizontal installation, max. 60 °C
●   vertical installation, min. 0 °C
●   vertical installation, max. 40 °C
Altitude during operation relating to sea level
●   Installation altitude above sea level, max. 3 000 m
configuration / header
Configuration software
●   STEP 7 Yes; STEP 7 / COM PROFIBUS / non-Siemens tools via GSD file
Dimensions
Width 40 mm
Height 125 mm
Depth 117 mm
Weights
Weight, approx. 360 g

Applications:

  • Process Automation:
    • Used in industries like pharmaceuticals, chemicals, and food & beverage for precise process control.
  • Factory Automation:
    • Ensures reliable and flexible control of machines and production lines.
  • Energy Management:
    • Integrated into systems for monitoring and managing energy usage.

Advantages:

  • Ease of Integration:
    • Seamlessly connects to Siemens automation systems and PROFINET networks.
  • Reliability:
    • High redundancy features for critical applications.
  • Scalability:
    • Easily expands with additional ET 200M modules.
  • Advanced Diagnostics:
    • Simplifies troubleshooting and minimizes downtime.

Reviews

There are no reviews yet.

Be the first to review “Siemens 6ES7153-2BA10-0XB0 ET200m Profinet”

Related products

error: Content is protected !!