“Delta DVP16SP11R Delta Digital Input Output Module” has been added to your cart. View cart

Siemens 332 5HF00 0AB0

Ask Price WhatsApp: +8801713-722455

Category: Module Tags: 332 5hf00, 5hf00, 5hf00 0ab0, 6es7332 5hf00 0ab0, 6es73325hf000ab0

Description
Reviews (0)

Description

The Siemens 332 5HF00 0AB0 is an analog output module from Siemens, specifically designed for the SIMATIC S7-300 Programmable Logic Controller (PLC) series. The 6ES7332-5HF00-0AB0 is a SIMATIC S7-300 Analog output Module, it’s called SM 332 isolated Module, it has 8 (Analog Output) AO, U/I; diagnostics; resolution 11/12 bits and 40-pole, removing and inserting possible with active backplane bus. This module is used to output analog signals, typically to control actuators, valves, or other devices that require analog input. If you need Siemens 332 5HF00 0AB0 analog output module, then you can contact “BAT Power Solution” Via E-mail/WhatsApp.

+8 outputs in one group
+Output can be selected by individual channels
– Voltage output
– current output
+The resolution is 12 bits
+Programmable diagnostics and diagnostic interrupts
+Programmable diagnostic interrupts
+The backplane is electrically isolated from the bus interface and load voltage
+Supports parameter reassignment in RUN

Key Features Siemens 332 5HF00 0AB0

Analog Outputs:
- The module provides 8 analog output channels. Each channel can be configured for either voltage or current signals, allowing it to drive various types of actuators and devices.
Signal Range:
- Voltage Output: 0-10V, ±10V
- Current Output: 0-20mA, 4-20mA
Resolution:
- The analog outputs typically have a resolution of 12 bits, offering precise control over the output signals.
Diagnostics:
- The module includes diagnostic functions that can detect issues such as short-circuits or wire breaks, which are essential for maintaining system reliability.
Compatibility:
- It is compatible with the SIMATIC S7-300 series of PLCs, allowing easy integration with other modules and components in the S7-300 ecosystem.
Connection:
- The module uses a front connector for wiring the analog outputs, which simplifies the installation and maintenance process.

Technical Specification of Siemens 332 5HF00 0AB0

Technical specifications
Dimensions and weight
Dimensions W x H x D (mm)		40 x 125 x 117
Weight		ca. 272 g
Module-specific data
Supports parameter reassignment in RUN	Yes
Reaction of non-programmed outputs	Return the output value which was valid before the parameterization
Supports isochronous mode		no
Number of inputs		8
Cable length		max. 200 m
shielded
Voltages, currents, electrical potentials
Rated load voltage L+		24 V DC
Reverse polarity protection		yes
Electrical isolation		yes
between channels and the backplane bus		yes
between channels and electronics power supply		no
between channels		yes
between channels and load voltage L+
Maximum potential difference		3 V DC
between S- and M_ANA (CMV₎
Isolation test voltage		500 V DC
Current consumption		max. 100 mA
from the backplane bus		max. 340 mA
From supply voltage L+
Power loss of the module		typ. 6.0 W
Generation of analog values
Resolution, including sign
± 10 V; ± 20 mA; 4 mA to 20 mA; 1 V to 5 V
0 V to 10 V; 0 mA to 20 mA;
Conversion time (per channel)		11 bits + sign
		12 Bit max.
		0.8 ms
Transient recovery time		0.2 ms
with resistive load		3.3 ms
with capacitive load		0.5 ms (1 mH)
with inductive load		3.3 ms (10 mH)
Interference frequency suppression, error limits
Crosstalk between outputs		> 40 dB
Operational limit (across entire temperature range, relative to measurement range end value in the selected output range)
Voltage output		±0.5 %
Current output		± 0.6 %
Basic error limit (operational limit at 25 °C, relative to the measurement range end value in the selected output range)
Output voltage		± 0.4 %
Output current		± 0.5 %
Temperature error (relative to output range)		± 0.002 %/K
Linearity error (relative to output range)		+ 0.05 %
Repeat accuracy (in transient state at 25 °C, relative to output range)		±0.05 %
Output ripple; bandwidth 0 kHz to 50 kHz (relative to output range)		±0.05 %
Status, interrupts, diagnostics
Interrupts		programmable
Diagnostic interrupt
Diagnostic functions		programmable
Group error display		red LED (SF)
Reading diagnostics information		supported
Actuator selection data
Output ranges (rated values)
Voltage		± 10 V
		0 V to 10 V
		1 V to 5 V
Current		± 20 mA
		0 mA to 20 mA
		4 mA to 20 mA
Load impedance (in the rated output range)
For voltage outputs		Min. 1 kΩ
– Capacitive load		Max. 1 µF
For current outputs		max. 500 Ω
– at CMV_< 1 V		max. 600 Ω
– with inductive load		max. 10 mH
Voltage output		yes
Short-circuit protection		max. 25 mA
Short-circuit current
Current output		max. 18 V
noload voltage
Destruction limit against external voltages/currents		max. 18 V continuous; 75 V for a duration of max. 1 s
Voltage at outputs to M_ANA		(duty factor 1:20)
Current		max. 50 mA d.c.
Wiring of the actuators		using a 40-pin front connector
for voltage output		supported
4–wire connection
for current output		supported
2–wire connection

The Siemens 6ES7332-5HF00-0AB0 is a versatile and reliable analog output module for the S7-300 PLC series, offering 4 channels of analog output with high precision and diagnostic capabilities. This module is ideal for applications where precise control over analog signals is necessary.

others Products