Siemens-223-1PH22-0XA0-EM223-DC-Relay
Siemens-223-1PH22-0XA0-EM223-DC-Relay
Siemens 223 1PH22 0XA0 EM223 DC Relay - Image 2

Siemens 223 1PH22 0XA0 EM223 DC Relay

Category: Tags: , , ,

Description

The Siemens 223 1PH22 0XA0 EM223 DC Relay is a digital input/output module of S7-200 Programmable Logic Controller (PLC). The Digital I/O EM 223 SIMATIC S7-200 Module used to only for S7-22X series Programmable Logic Controller (PLC), This Module has 8 DI (Digital Input) 24 V DC, Sink/Source & 8 DO (Digital Output) relay, 2 A/channel

Download Manual

Specification of Siemens 223 1PH22 0XA0 EM223 DC Relay

Brand SIEMENS
Mdoel Siemens 223 1PH22 0XA0 EM223 DC Relay
Supply voltage
Load voltage L+
●   Rated value (DC) 24 V
●   permissible range, lower limit (DC) 5 V
●   permissible range, upper limit (DC) 30 V
Load voltage L1
●   Rated value (AC) 230 V; 24V AC to 230V AC
●   permissible range, lower limit (AC) 5 V
●   permissible range, upper limit (AC) 250 V
Input current
from external supply (24 V DC), max. 72 mA
from backplane bus 5 V DC, max. 80 mA
from coil current, max. 9 mA; for each output on signal “1”
Power loss
Power loss, typ. 3 W
Digital inputs
Number of digital inputs 8
Input voltage
●   Type of input voltage DC 24 V
●   Rated value (DC) 0 to 5 V
●   for signal “0” 15 V DC to 30 V DC
●   for signal “1”
Input current
●   for signal “1”, typ. 4 mA
Input delay (for rated value of input voltage)
for standard inputs
— at “0” to “1”, max. 4.5 ms
Digital outputs
Number of digital outputs 8; Relays
Short-circuit protection NO
Output voltage
●   for signal “0”, max. 0.1 V; with 10 kOhm load L+/L1
●   for signal “1”, min.
Output current
●   for signal “1” rated value 2 000 mA
Total current of the outputs (per group)
all mounting positions
— Current per conductor/group, max. 8:00 AM
Relay outputs
●   Number of operating cycles, max. 10 000 000; mechanically 10 million, at rated load voltage 100 000
Switching capacity of contacts
— with inductive load, max. 0.75 A; each output
— on lamp load, max. 200 W; 30 W with DC, 200 W with AC
— with resistive load, max. 0.75 A; each output
Cable length
●   shielded, max. 500 m
●   unshielded, max. 150 m
Encoder
Connectable encoders
●   2-wire sensor Yes 1 mA
— permissible quiescent current (2-wire sensor), max.
Potential separation
Potential separation digital inputs
●   Potential separation digital inputs Yes; Optocoupler 4
●   between the channels, in groups of
Potential separation digital outputs
●   Potential separation digital outputs Yes; Relays 4
●   between the channels, in groups of
Isolation
Isolation tested with 500 V AC
connection method
Plug-in I/O terminals Yes
Dimensions
Width 71.2 mm
Height 80 mm
Depth 62 mm
Weights
Weight, approx. 300 g

 

Others Module

 

Reviews

There are no reviews yet.

Be the first to review “Siemens 223 1PH22 0XA0 EM223 DC Relay”

Related products

error: Content is protected !!