SAMKOON SA-DVP SK-DVP AK-DVP PLC Cable

Description

The SAMKOON SA-DVP SK-DVP AK-DVP PLC Cable is used for communication between SAMKOON HMI (Human-Machine Interface) and a Delta DVP PLC (Programmable Logic Controller). This cable facilitates the connection and data transfer between the HMI and Delta’s DVP series PLCs, allowing the HMI to monitor and control the PLC’s operations. If you need to SAMKOON SA/SK-DVP PLC Communication Cable, you can contact BAT Power Solution Via WhatsAPP/Call.

Key Features SAMKOON SA-DVP SK-DVP AK-DVP PLC Cable

• HMI to Delta DVP PLC Communication: This cable is designed to interface the HMI directly with the Delta DVP series PLCs, enabling smooth data communication for monitoring, control, and configuration.
• RS232/RS485/RS422 Support: Depending on the specific HMI and PLC models, the cable supports different communication protocols, such as RS232, RS485, or RS422.
• Plug-and-Play Connection: The cable provides a straightforward connection between the HMI and PLC, simplifying the communication setup.

Others cable

Cable Specifications

1. HMI End:
   • The connector on this end is designed to connect to the communication port of the HMI, which may vary depending on the HMI model (RS232, RS485, or RS422).
2. Delta DVP PLC End:
   • The other end of the cable connects to the Delta DVP PLC communication port (typically RS232 or RS485), allowing data transfer between the PLC and the HMI.
3. Communication Protocol:
   • The cable supports protocols such as RS232 and RS485, depending on the communication needs of the Delta DVP PLC and the HMI.

Supported Delta DVP PLC Models

• Delta DVP Series PLCs:
  • Models like DVP-12SE, DVP-14SS2, DVP-16SP, DVP-ES2, DVP-ES3, DVP-SA2, and other PLCs in the DVP series.

Supported HMI Models

The cable is typically compatible with HMIs from various manufacturers that support RS232 or RS485/RS422 communication, including Delta’s own DOP series or other third-party HMIs like Weintek, Pro-face, etc.

Connection Setup SAMKOON SA-DVP SK-DVP AK-DVP PLC Cable

1. Connect the HMI End of the SA-SK-AK-DVP cable to the HMI communication port.
2. Connect the PLC End to the Delta DVP PLC communication port (RS232 or RS485/RS422).
3. Open the HMI programming software (e.g., Delta DOPSoft or any compatible HMI software).
4. Configure the communication settings such as baud rate, parity, data bits, and other parameters to match those on the Delta DVP PLC.
5. Test the communication to ensure that the HMI and PLC are successfully exchanging data.

Software Used

• Delta DOPSoft: The software used for programming Delta HMIs (DOP series) and configuring their communication with Delta PLCs.
• Other HMI Software: Third-party HMI software such as Weintek’s EasyBuilder Pro, Pro-face GP-Pro EX, etc., can also be used if the HMI is from another manufacturer.