DOP-DVP Delta HMI to plc communication cable

Description

The DOP-DVP Delta HMI to plc communication cable is used to connect a Delta DOP series HMI to a Delta DVP series PLC. It facilitates communication and data exchange between the Human-Machine Interface (HMI) and the Programmable Logic Controller (PLC). The type of cable and connection you use depends on the communication interface (RS-232, RS-485, RS-422, or Ethernet) that is supported by both the HMI and PLC. If need DOP-DVP Delta DOP HMI to DVP PLC Cable or delta plc to delta hmi communication cable price in Bangladesh you can contact BAT Power Solution Via WhatsApp: +8801713722455/+8801911300632

Common Cable Types for delta plc to delta hmi communication cable

1. RS-232 Communication Cable
   • Cable Type: RS-232 serial communication cable.
   • Use Case: For connecting Delta DOP series HMIs (e.g., DOP-B or DOP-W series) to Delta DVP series PLCs (e.g., DVP-ES2, DVP-SS2).
   • Connector Type: Typically, a DB9 female connector on the HMI side and a DB9 male connector on the PLC side.
   • Cable Model: The commonly used RS-232 cable for connecting DOP HMIs to DVP PLCs is CAB-DVP-03A.
   • Pin Configuration:
     • HMI Pin 2 ↔ PLC Pin 3 (Receive to Transmit).
     • HMI Pin 3 ↔ PLC Pin 2 (Transmit to Receive).
     • HMI Pin 5 ↔ PLC Pin 5 (Ground to Ground).
   • Length: Typically around 1.5 to 3 meters.
2. RS-485 Communication Cable
   • Cable Type: RS-485 communication cable.
   • Use Case: Used when RS-485 is the preferred communication interface, often chosen for long-distance communication or multi-drop networks involving multiple PLCs and HMIs.
   • Connector Type: Typically uses terminal blocks or RJ-45 connectors.
   • Cable Model: A twisted-pair RS-485 cable such as CAB-DVP-50 can be used for this purpose.
   • Wiring Configuration: The wiring generally follows the connection scheme:
     • A+ (Data+) to A+.
     • B- (Data-) to B-.
3. Ethernet Communication Cable
   • Cable Type: Standard Ethernet cable (e.g., CAT5e or CAT6).
   • Use Case: For Delta PLCs and HMIs that have Ethernet ports. This is suitable for high-speed communication and data transfer.
   • Connector Type: RJ-45 connectors on both ends.
   • Configuration: Both the HMI and PLC must be configured with IP addresses within the same network.
4. USB Communication Cable
   • Cable Type: USB A to USB Mini-B or USB A to USB B.
   • Use Case: If the HMI and PLC have USB ports for programming or communication, a USB cable can be used.

Key Considerations for DOP-DVP Delta HMI to plc communication cable:

1. Compatibility:
   • Ensure that the cable matches the communication ports of the HMI and PLC. RS-232, RS-485, and Ethernet all have different requirements.
2. Communication Parameters:
   • Set the baud rate, parity, stop bits, and data bits to be the same on both the HMI and the PLC. These settings can be configured using programming software.
3. Cable Length:
   • RS-232 is suitable for shorter distances (typically up to 15 meters).
   • RS-485 can support longer distances (up to 1200 meters).

Programming Software:

• DOPSoft: Use DOPSoft software to configure and program the Delta DOP series HMI.
• WPLSoft or ISPSoft: Use WPLSoft or ISPSoft for programming the Delta DVP series PLC.
• Make sure to select the correct COM port or Ethernet settings for communication.

Example Configurations:

• Delta DOP-B07S411 (HMI) to DVP-14SS2 (PLC) using RS-232:
  • Use CAB-DVP-03A cable.
  • Connect the DB9 connectors from HMI to PLC.
• Delta DOP-W105B (HMI) to DVP-20SX2 (PLC) using RS-485:
  • Use an RS-485 twisted pair cable.
  • Connect A+ to A+ and B- to B- on both the HMI and PLC.

The DOP-DVP cable is crucial for establishing communication between Delta DOP HMIs and DVP PLCs. The most commonly used cable is the CAB-DVP-03A RS-232 cable, but other options like RS-485 twisted-pair or Ethernet cables may be required depending on the devices and communication requirements. Always verify compatibility, connector types, and communication settings to ensure a successful connection.

DVPACAB230