Siemens 6ES7223 1BH32 0XB0 SM1223 DC DC

Description
Reviews (0)

Description

Siemens 6ES7223 1BH32 0XB0 SM1223 DC DC is digital input output module of Siemens s71200 Programmable Logic Controller. The SIMATIC S7-1200, Digital I/O SM 1223 module has 8 Digital Input (DI) & 8 Digital Output (DO), This Module 8 DI 24 V DC, Sink/Source, 8 DO, transistor 0.5 A

Download Manual

Specification of Siemens 6ES7223 1BH32 0XB0 SM1223 DC DC

Brand	Siemens
Product Model	Siemens 6ES7223 1BH32 0XB0
General information
Product type designation	SM 1223, DI 8×24 V DC, DQ 8×24 V DC
Supply voltage
Rated value (DC)	24 V
permissible range, lower limit (DC)	20.4 V
permissible range, upper limit (DC)	28.8 V
Input current
from backplane bus 5 V DC, max.	145 mA
Digital inputs
● from load voltage L+ (without load), max.	4 mA; per channel
output voltage / header
supply voltage of the transmitters / header
● present	Yes
Power loss
Power loss, typ.	2.5 W
Digital inputs
Number of digital inputs	8
● in groups of	2
Input characteristic curve in accordance with IEC 61131, type 1	Yes
Number of simultaneously controllable inputs
all mounting positions
— up to 40 °C, max.	8
horizontal installation
— up to 40 °C, max.	8
— up to 50 °C, max.	8
vertical installation
— up to 40 °C, max.	8
Input voltage
● Type of input voltage	DC 24 V
● Rated value (DC)	5 V DC at 1 mA
● for signal “0”	15 V DC at 2.5 mA
● for signal “1”
Input current
● for signal “0”, max. (permissible quiescent current)	1 mA
● for signal “1”, min.	2.5 mA 4 mA
● for signal “1”, typ.
Input delay (for rated value of input voltage)
for standard inputs
— parameterizable	Yes; 0.2 ms, 0.4 ms, 0.8 ms, 1.6 ms, 3.2 ms, 6.4 ms and 12.8 ms, selectable in

	groups of four
for interrupt inputs
— parameterizable	Yes
Cable length
● shielded, max.	500 m
● unshielded, max.	300 m
Digital outputs
Number of digital outputs	8
● in groups of	1
Short-circuit protection	No; to be provided externally L+ (-48 V)
Limitation of inductive shutdown voltage to
Switching capacity of the outputs
● with resistive load, max.	0.5 A
● on lamp load, max.	5 W
Output voltage
● Rated value (DC)	24 V
● for signal “0”, max.	0.1 V; with 10 kOhm load 20 V DC
● for signal “1”, min.
Output current
● for signal “1” rated value	0.5 A
● for signal “1” permissible range, max.	0.5 A 10 µA
● for signal “0” residual current, max.
Output delay with resistive load
● “0” to “1”, max.	50 µs
● “1” to “0”, max.	200 µs
Total current of the outputs (per group)
horizontal installation
— up to 50 °C, max.	4 A; Current per mass
Cable length
● shielded, max.	500 m
● unshielded, max.	150 m
Interrupts/diagnostics/status information
Alarms
● Diagnostic alarm	Yes
Diagnostics indication LED
● for status of the inputs	Yes
● for status of the outputs	Yes
Potential separation
Potential separation digital inputs
● between the channels, in groups of	2
Potential separation digital outputs
● between the channels, in groups of	1
● between the channels and backplane bus	500 V AC
Degree and class of protection
IP degree of protection	IP20
Standards, approvals, certificates
CE mark	Yes
CSA approval	Yes
UL approval	Yes
cULus	Yes
FM approval	Yes
RCM (formerly C-TICK)	Yes
KC approval	Yes
Marine approval	Yes
Ambient conditions
Free fall
● Fall height, max.	0.3 m; five times, in product package
Ambient temperature during operation
● min.	-20 °C
● max.	60 °C

● horizontal installation, min.	-20 °C
● horizontal installation, max.	60 °C
● vertical installation, min.	-20 °C
● vertical installation, max.	50 °C
● permissible temperature change	5°C to 55°C, 3°C / minute
Ambient temperature during storage/transportation
● min.	-40 °C
● max.	70 °C
Air pressure acc. to IEC 60068-2-13
● Storage/transport, min.	660 hPa
● Storage/transport, max.	1 080 hPa
Relative humidity
● Operation at 25 ℃ without condensation, max.	95%
connection method
required front connector	Yes
Mechanics/material
Enclosure material (front)
● Plastic	Yes
Dimensions
Width	45 mm
Height	100 mm
Depth	75 mm
Weights
Weight, approx.	210 g
Origin	China