Siemens 6ES7134 4FB01 0AB0

Category: Module Tag: Siemens 6ES7134 4FB01 0AB0

Description
Reviews (0)

Description

Siemens 6ES7134 4FB01 0AB0 is an analog input Module SIMATIC DP, Electronics module for ET 200S series Programmable Logic Controller (PLC), The ET 200S 4FB01 Module has 2 Analog Input (AI) Standard U 15 mm width, +/-10V; 13 bit +sign +/-5 V; 12 bit +sign, 1…5 V; 12-bit Cycle time 65 ms/channel with SF LED (group fault), If need this Module then you can contact “BAT Power Solution” & will be provide to your products within one days.

Download Manual

Specifications of Siemens 6ES7134 4FB01 0AB0

Part Number	6ES7134-4FB01-0AB0
General information
Product function
● Isochronous mode	No
Supply voltage
Load voltage L+
● Rated value (DC)	24 V; From power module
● Reverse polarity protection	Yes
Input current
from load voltage L+ (without load), max.	30 mA
from backplane bus 3.3 V DC, max.	10 mA
Power loss
Power loss, typ.	0.6 W
Address area
Address space per module
● Address space per module, max.	4 byte
Analog inputs
Number of analog inputs	2
Number of analog inputs
permissible input voltage for voltage input (destruction limit), max.	35 V; 35 V continuous; 75 V for max. 1 ms (mark to space ratio 1:20)
Cycle time (all channels) max.	Number of active channels per module x basic conversion time
Input ranges (rated values), voltages
● 1 V to 5 V	Yes
● -10 V to +10 V	Yes
● -5 V to +5 V	Yes
Cable length
● shielded, max.	200 m
Analog value generation for the inputs
conversion method / at the analog input	integrating
Integration and conversion time/resolution per channel
● Resolution with overrange (bit including sign), max.	14 bit; ±10 V: 13 bit + sign, ±5 V: 13 bit + sign; 1 to 5 V: 13 bit
● Integration time, parameterizable	Yes
● Integration time (ms)	16,7 / 20 ms
● Interference voltage suppression for interference frequency f1 in Hz	50 / 60 Hz
● Conversion time (per channel)	65 ms; 55 / 65 ms
Smoothing of measured values
● parameterizable	Yes; In four stages by means of digital filtering
● Step: None	Yes; 1x cycle time
● Step: low	Yes; 4x cycle time

● Step: Medium	Yes; 32x cycle time
● Step: High	Yes; 64x cycle time
Errors/accuracies
Operational error limit in overall temperature range
● Voltage, relative to input range, (+/-)	0.60%
Basic error limit (operational limit at 25 °C)
● Voltage, relative to input range, (+/-)	0.40%
Interrupts/diagnostics/status information
Diagnoses
● Wire-break	Yes; Measuring range 1 to 5 V only
● Group error	Yes
● Overflow/underflow	yes
Diagnostics indication LED
● Group error SF (red)	Yes
Parameter
Remark	4 byte
Diagnostics wire break	Disable / enable (only in measuring range 1 to 5 V)
Group diagnostics	Disable / enable
Overflow/underflow	Disable / enable
Potential separation
Potential separation analog inputs
● between the channels	No
● between the channels and backplane bus	Yes
● Between the channels and load voltage L+	Yes
Isolation
Isolation tested with	500 V DC
Dimensions
Width	15 mm
Height	81 mm
Depth	52 mm
Weights
Weight, approx.	40 g