Siemens 6ES7132 4BF00 0AA0

Description

Siemens 6ES7132 4BF00 0AA0 is the Digital output module of Siemens ET200 Series Programmable Logic Controller (PLC), The Electronics module for ET 200S has 8 Digital Output (DO) 24 V DC/0.5 A, 15 mm width, 1 unit per packing unit. If you need to install or buy this module, then you can contact us BAT Power Solution via Email or WhatsApp.

The part number “6ES7132-4BF00-0AA0” refers to a module within the Siemens SIMATIC ET 200S series. Specifically, this part number identifies a digital output module.

 Download Manual

Key Features of the Siemens 6ES7132 4BF00 0AA0 Digital Output Module:

Series: SIMATIC ET 200S

Type: Digital Output Module

Outputs: 4 digital outputs

Output Type: Typically, the outputs are 24V DC

Output Current: Each output can typically handle up to 0.5A

Connector Type: The module uses front connectors for wiring, which are a part of the ET 200S system’s modular design

Mounting: DIN rail mounting within the ET 200S system rack

Applications:

This module is used in decentralized peripheral systems to control digital output signals, such as turning on or off lights, relays, solenoid valves, and other actuators within an industrial automation setup.

Another Module

Compatibility:

The 6ES7132-4BF00-0AA0 is designed to be used within the SIMATIC ET 200S distributed I/O system. It connects to the ET 200S interface module and can be integrated with other ET 200S modules to create a versatile and flexible automation solution.

 

Summary:

Part Number: 6ES7132-4BF00-0AA0

Series: SIMATIC ET 200S

Type: Digital Output Module

Outputs: 4 x 24V DC, 0.5A each

Application: Decentralized control of digital outputs in industrial automation systems

Mounting: DIN rail

This module is part of Siemens’ modular and scalable approach to industrial automation, allowing for flexible and efficient control of digital outputs in various applications.

 

Specification of Siemens 6ES7132 4BF00 0AA0

 

Part number	6ES7132-4BF00-0AA0
Product Description	Electronics module for ET 200S
Supply voltage
Reverse voltage protection	Yes
Load voltage L+
●   Rated value (DC)	24 V
●   Reverse polarity protection	Yes
Input current
from load voltage L+ (without load), max.	5 mA; Per channel 10 mA
from backplane bus 3.3 V DC, max.
Power loss
Power loss, typ.	1.5 W
Address area
Address space per module
●   Address space per module, max.	1 byte
Digital outputs
Type of digital output	Source output (PNP, current-sourcing)
Number of digital outputs	8
Short-circuit protection	Yes
●   Response threshold, typ.	1.5 A
Limitation of inductive shutdown voltage to	Typ. L+ (-55 to -60 V)
Controlling a digital input	Yes
Switching capacity of the outputs
●   on lamp load, max.	5 W
Load resistance range
●   lower limit	48 Ω
●   upper limit	3 400 Ω
Output voltage
●   for signal “1”, min.	L+ (-1.0 V)
Output current
●   for signal “1” rated value	0.5 A
●   for signal “1” permissible range, min.	7 mA
●   for signal “1” permissible range, max.	600 mA
●   for signal “0” residual current, max.	0.3 mA
Output delay with resistive load
●   “0” to “1”, max.	300 µs
●   “1” to “0”, max.	600 µs
Parallel switching of two outputs
●   for uprating	No
●   for redundant control of a load	Yes
Switching frequency
●   with resistive load, max.	100 Hz
●   with inductive load, max.	2 Hz
●   on lamp load, max.	10 Hz
Total current of the outputs
●   Current per module, max.	4:00 AM
Cable length
●   shielded, max.	1 000 m
●   unshielded, max.	600 m
Interrupts/diagnostics/status information
Diagnostics function	No
Diagnostics indication LED
●   Status indicator digital output (green)	Yes
Parameter
Remark	3-byte parameter (not accessible for the user)
Potential separation
Potential separation digital outputs
●   between the channels	No
●   between the channels and backplane bus	Yes
Isolation
Isolation tested with	500 V DC
Dimensions
Width	15 mm
Height	81 mm
Depth	52 mm
Weights
Weight, approx.	40 g

 

 

●   with resistive load, max. ●   with inductive load, max. ●   on lamp load, max.	100 Hz 2 Hz 10 Hz
Total current of the outputs
●   Current per module, max.	4 A
Cable length
●   shielded, max. ●   unshielded, max.	1 000 m 600 m
Interrupts/diagnostics/status information
Diagnostics function	No
Diagnostics indication LED
●   Status indicator digital output (green)	Yes
Parameter
Remark	3-byte parameter (not accessible for the user)
Potential separation
Potential separation digital outputs
●   between the channels ●   between the channels and backplane bus	No Yes
Isolation
Isolation tested with	500 V DC
Dimensions
Width	15 mm 81 mm 52 mm
Height
Depth
Weights
Weight, approx.	40 g