PWS6600-FX Hitech HMI to FX Mitsubishi PLC Cable

Description

The PWS6600-FX Hitech HMI to FX Mitsubishi PLC cable allows for the communication between a Hitech PWS6600 series HMI and a Mitsubishi FX series PLC. This cable typically converts signals between the HMI’s communication port and the PLC’s communication port, enabling them to communicate efficiently for the purposes of control, monitoring, and data transfer. If you need PWS6600-FX Cable you can contact BAT Power Solution via WhatsApp/Call.

Key Features PWS6600-FX Hitech HMI to FX Mitsubishi PLC Cable

• Direct Communication: Facilitates communication between the HMI and the PLC for real-time monitoring, control, and data exchange.
• Plug-and-Play: Generally, the cable supports plug-and-play communication once properly connected, without the need for complex configuration.

Others Cable

Cable Specifications

1. HMI End (PWS6600):
   • The HMI end of the cable connects to the RS232/RS485 communication port of the Hitech PWS6600 series HMI.
2. PLC End (Mitsubishi FX):
   • The PLC end of the cable connects to the RS422/RS232 communication port of the Mitsubishi FX series PLC.
   • In most cases, it connects to the programming port or a dedicated communication port on the Mitsubishi FX PLC.
3. Wiring: Depending on the exact model and configuration, the cable might involve a conversion between different signal types (e.g., RS232 to RS422), and wiring must be done according to the specific pinout requirements of both devices.

Common Part Number:

A typical part number for this communication cable could be PWS6600-FX, but variations may exist depending on the exact type of connectors or communication standard used (RS232 or RS485).

Supported Devices 

• Hitech PWS6600 Series HMI:
  • This includes models like PWS6600S, PWS6600T, PWS6600C, and other variants in the PWS6600 family.
• Mitsubishi FX Series PLC:
  • FX1N, FX1S, FX2N, FX3U, FX3G, and other PLCs in the Mitsubishi FX series that support RS232 or RS422 communication.

Connection Setup Hitech HMI to FX Mitsubishi PLC Cable

1. Connect the cable between the communication port on the Hitech PWS6600 HMI and the Mitsubishi FX PLC.
2. Configure the communication parameters (baud rate, parity, data bits, stop bits) in both the HMI and the PLC to match. This is usually done via the HMI’s configuration software and the PLC’s programming software (such as GX Developer).
3. Test the communication by running a simple monitoring or control function between the HMI and the PLC.