Panasonic Minas A4 servo programming cable USB DVOP1960

Description

The Panasonic Minas A4 servo programming cable USB DVOP1960 is used to connect a computer to Panasonic A4 series Servo Drives for programming, configuration, monitoring, and troubleshooting. This cable provides a USB-to-serial interface that allows communication between a computer and the servo drive’s communication port. If you need Panasonic Minas A4 series Panasonic servo drive programming cable USB DVOP1960, you can contact BAT Power Solution.

Panasonic Minas A4 servo programming cable USB DVOP1960 Details

1. Cable Model:
   • The USB DVOP1960 cable is specifically designed for Panasonic A4 Servo Drives.
   • It is used to connect the servo drive to a computer running Panasonic’s servo configuration software.
2. Connection Type:
   • The cable has a USB Type A connector on one end, which plugs into the computer’s USB port.
   • The other end is fitted with a dedicated connector designed to fit the communication port on Panasonic A4 Servo Drives (typically a Mini-DIN or RJ45-style connector, depending on the drive model).
3. Use Case:
   • The USB DVOP1960 cable is used to program and configure the A4 servo drive, adjust parameters, upload/download settings, and perform real-time monitoring.
   • It works with Panasonic software, such as Panasonic PANATERM or similar servo configuration software.
4. Cable Length:
   • The cable is usually around 1.5 to 3 meters in length, providing enough flexibility for convenient connection during setup and programming tasks.
5. Driver Requirements:
   • The USB DVOP1960 cable requires a USB-to-serial driver to be installed on the computer. This driver creates a virtual COM port, enabling communication between the computer and the servo drive.
   • Drivers are typically provided with the cable or can be downloaded from the Panasonic support website.

Installation and Connection Instructions

1. Connect the Cable:
   • Plug the USB Type A connector into your computer’s USB port.
   • Plug the other end of the cable into the communication port of the Panasonic A4 Servo Drive.
2. Driver Installation:
   • Upon connecting the cable for the first time, the computer may prompt you to install the USB-to-serial driver.
   • Install the driver (it may be included with the cable or available on the Panasonic website) to create the necessary virtual COM port.
3. Configure Software:
   • Open the Panasonic PANATERM software or similar servo drive configuration software on your computer.
   • Select the correct COM port that was assigned to the USB DVOP1960 cable (you can check this in the Device Manager on your computer).
4. Programming and Configuration:
   • With the connection established, you can now use the software to configure the servo drive, upload/download parameters, and monitor the system in real-time.
   • You can also make adjustments to the servo’s performance parameters, monitor status, and troubleshoot any issues.

The USB DVOP1960 programming cable is essential for connecting Panasonic A4 Servo Drives to a computer via a USB port for programming and monitoring. It requires a USB-to-serial driver to create a virtual COM port, allowing the Panasonic PANATERM software to communicate with the servo drive. The cable simplifies the task of configuring, tuning, and diagnosing Panasonic A4 servo systems.

Others Programming Cable