Omron USB CIF02 Omron PLC Programming Cable

Description

The Omron USB CIF02 Omron PLC Programming Cable is a USB-to-RS232 interface cable used to connect a PC to Omron PLCs that have a peripheral port (typically for older models). It allows for programming, monitoring, and troubleshooting of Omron PLCs using Omron’s programming software, such as CX-Programmer. If you need USB-CIF02 Omron PLC Programming Cable price in BD or Omron plc to pc communication cable Price in BD, you can contact BAT Power Solution via WhatsApp: +8801713722455.

Key Features of Omron USB CIF02 Omron PLC Programming Cable

1. USB to RS232 Interface:
   • The cable provides a conversion from USB on the computer to RS232 for the PLC’s peripheral port.
   • This is useful for modern computers that no longer have traditional RS232 serial ports.
2. Peripheral Port Connection:
   • The cable connects to the Omron PLC’s peripheral port, typically found on older PLC models such as the CPM1, CPM1A, CPM2A, CQM1, C200HS, C200HX/HG/HE, and other Omron PLCs that use this port.
   • The PLC side of the cable uses a proprietary connector designed to fit Omron’s peripheral port.
3. Driver Installation:
   • The USB-CIF02 requires a driver to be installed on the PC, which allows the USB connection to be recognized as a virtual COM port.
   • The driver is usually included with the cable or can be downloaded from the Omron support website.
4. Compatible Software:
   • The cable is used with Omron’s programming software, CX-Programmer, which is part of the CX-One suite.
   • CX-Programmer is used to program and troubleshoot Omron PLCs.
5. Data Transmission:
   • It supports full-duplex communication for reading and writing PLC programs, as well as real-time data monitoring.

Applications

• Programming: The USB-CIF02 is used to upload and download programs between the Omron PLC and the computer.
• Monitoring: It allows real-time data monitoring of PLC performance and the reading of I/O status.
• Troubleshooting: The cable enables you to check and diagnose errors or issues in the PLC’s operation through the software.

Connection Setup  USB-CIF02 Omron

1. Connect the USB end to your PC.
2. Install the driver for the USB-CIF02 (if not installed automatically). The cable usually comes with a CD for driver installation or you can download it from Omron’s website.
3. Connect the other end to the Omron PLC’s peripheral port.
4. Open the CX-Programmer software and configure the communication settings (select the appropriate COM port and baud rate settings).
5. Establish communication and start programming, monitoring, or troubleshooting the PLC.

Supported Omron PLC Models

• CPM1, CPM1A, CPM2A
• CQM1, CQM1H
• C200HS, C200HX/HG/HE
• Other PLCs with the same peripheral port configuration.

Important Considerations

• The USB-CIF02 cable is mainly for older Omron PLC models that do not have native USB programming interfaces. Newer models typically use direct USB connections or Ethernet.
• Always ensure that the driver is correctly installed to avoid issues with recognizing the cable as a COM port.

Others Cable