Omron CJ1W ID211 Omron plc module

Description

The Omron CJ1W ID211 Omron plc module is the Digital input Module of OMRON Programmable Logic Controller (PLC), The CJ1W-ID211 Module has 16 Digital Input 24 VDC, 7 mA . This Module is the CJ Series Input unit of OMRON. The terminal number Omron id211 is the A0-A8 & B0-B8, and number of input In00-In15. This module is Compatible PLC Series CJ1M, CJ1G, CJ1H, CJ2M, CJ2H, NSJ (with built-in CJ1 CPU).

Specifications of Omron CJ1W ID211 Omron plc module

Name	16-point DC Input Unit with Terminal Block
Model	CJ1W-ID211
Rated Input Voltage	24 VDC
Rated Input Voltage Range	20.4 to 26.4 VDC
Input Impedance	3.3 kΩ
Input Current	7 mA typical (at 24 VDC)
ON Voltage/ON Current	14.4 VDC min./3 mA min.
OFF Voltage/OFF Current	5 VDC max./1 mA max.
ON Response Time	8.0 ms max. (Can be set to between 0 and 32 ms in the Setup.) *1
OFF Response Time	8.0 ms max. (Can be set to between 0 and 32 ms in the Setup.) *1
Number of Circuits	16 (16 points/common, 1 circuit)
Number of Simultaneously	100% simultaneously ON (at 24 VDC) (Refer to the following illustration.)
ON Points
Insulation Resistance	20 MΩ min. between external terminals and the GR terminal (100 VDC)
Dielectric Strength	1,000 VAC between the external terminals and the GR terminal for 1 minute at a leakage current of
	10 mA max.
Internal Current Consumption	80 mA max.
Weight	110 g max.

 

Features of CJ1W-ID / IA

+High-speed input models are accessible, assembly flexible applications. ON Reaction Time: 15μs, OFF Reaction Time: 90μs

+Use 24-VDC, 100-VAC, and 200-VAC models to interface to gadgets with diverse sorts of outputs.

+The 24-VDC models can be associated to gadgets with either NPN or PNP yields. There is no require to select the extremity. *1

+A advanced channel in the Unit can be set from 0 to 32 ms to decrease the impact of outside noise.

+ Either a Fujitsu / OTAX or MIL connector interface can be utilized. *2

+ A few models of Terminal Square Transformation Units are accessible, making it simple to interface to outside devices.

+The same extremity is utilized for the same common.

+For models with 32 or 64 inputs.

How to Configure Omron CJ1W ID211 Omron plc module in CX-Programmer

+Open the CX-Programmer and create a new project.

+Select the correct CPU (CJ1, CJ2, or compatible model).

+Add the I/O Module CJ1W-ID211 to the rack in the PLC Configuration window.

+Assign Addressing:

1. The first input module is assigned to (CIO 0000 – 000F)
2. The next module follows sequentially (CIO 0010 – 001F, etc.).

+Write a Ladder Logic Program using these input addresses.

+Finally Download the Program to the PLC and test the inputs.

Application of CJ1W-ID211

The OMRON CJ1W-ID211 Digital Input module is used to extend OMRON CJ Series CPU. When we need many Digital input/ Digital output then we need to extend CPU Digital input and output.

Some application of CJ1W-ID211 Module

+ we can Monitor the Switch Sensor & buttons

+ we can easily be counting any products by using Sensor.

+Monitoring the machine parts position by using proximity sensor.

+ Detecting the object by using the photoelectric sensor.

+ Monitoring the safety device for example emergency stop button, Motor safety device such as overload.

Conclusion

If you need to Omron CJ1W ID211 Omron plc module price in Bangladesh or if you need to Omron id211 Configure then you can contact BAT Power Solution via Call/WhatsApp: +8801713722455.

Others OMRON PLC