KINCO HMI Programming Cable USB-MT4000/5000

USB-MT4000/5000 Price in Bangladesh

Model: USB-MT4000/5000

Origin: China

Ask Price  Call/WhatsApp: +8801713-722455

Description

The KINCO HMI Programming Cable USB-MT4000/5000 is used for programming Kinco HMI MT4000 and MT5000 series devices. This cable allows you to connect the HMI to a PC for tasks such as uploading/downloading HMI projects, configuring settings, and performing diagnostics. If need KINCO HMI Programming Cable USB-MT4000/5000 you can contact BAT Power Solution Via CALL/WhatsApp: +8801713722455.

Key Features

  • USB Interface: Provides easy connection between the PC’s USB port and the HMI’s communication port for programming and configuration.
  • Plug-and-Play: Typically, the cable supports plug-and-play functionality once the required drivers are installed.
  • Kinco HMI Compatibility: Specifically designed to work with Kinco MT4000 and MT5000 series HMIs.

Cable Specifications of KINCO HMI Programming Cable USB-MT4000/5000

  1. PC End:
    • USB Type A connector, which plugs into the USB port on the PC.
  2. HMI End:
    • A connector that fits into the programming port of the Kinco MT4000/5000 series HMI. This is typically a USB Type B connector or a proprietary connector specific to the Kinco HMI models.
  3. Driver Installation:
    • The cable requires a USB driver that creates a virtual COM port on your PC, enabling communication between the programming software and the HMI.

Others Cable

Connection Setup

  1. Connect the USB end of the USB-MT4000/5000 cable to the PC’s USB port.
  2. Install the necessary driver if it is not automatically recognized by the PC. The driver can often be found on Kinco’s official website or included with the HMI.
  3. Connect the HMI end of the cable to the Kinco MT4000/5000 HMI programming port.
  4. Open the Kinco HMIware software on your PC.
  5. Select the correct COM port in the software (corresponding to the virtual COM port created by the USB cable).
  6. You can now proceed to upload or download projects, configure the HMI, and monitor its operation.

Supported Kinco HMI Models

  • Kinco MT4000 Series HMIs:
    • MT4404T, MT4404TE, MT4414T, MT4512T, etc.
  • Kinco MT5000 Series HMIs:
    • MT5403T, MT5504T, MT5505T, MT5510T, etc.

Software Used for KINCO HMI Programming Cable USB-MT4000/5000

  • Kinco HMIware or Kinco DTools: These are the programming environments used to create, upload, and download HMI projects, configure settings, and perform diagnostics on Kinco HMIs.

Troubleshooting Tips:

  • Driver Installation Issues: If the PC does not recognize the cable, try reinstalling the USB driver or downloading it from the Kinco website.
  • Communication Issues: Ensure the correct COM port is selected in the Kinco HMIware software. If the port is incorrect, communication with the HMI will not be established.
  • Cable Connection: Double-check the connection between the cable and the HMI to ensure it’s securely attached to both the PC and the HMI.

Reviews

There are no reviews yet.

Be the first to review “KINCO HMI Programming Cable USB-MT4000/5000”

error: Content is protected !!