delta hmi to mitsubishi plc communication cable

Description

The delta hmi to mitsubishi plc communication cable DOP-FX is used to connect a Delta DOP series HMI (Human-Machine Interface) to a Mitsubishi FX series PLC. It is specifically designed for RS-232 communication between these devices and ensures proper pin configuration for seamless data transmission. If you need DOP-FX Cable in BD you can contact BAT Power Solution Via WhatsApp: +8801713722455

Cable Specifications for delta hmi to mitsubishi plc communication cable DOP-FX:

1. Cable Type:
   • RS-232 Communication Cable.
2. Use Case:
   • Used to connect Delta DOP series HMIs (such as DOP-B and DOP-W models) to Delta DVP-FX series PLCs for programming, monitoring, and data exchange.
3. Connectors:
   • One end of the cable has a DB9 female connector for the HMI.
   • The other end has a DB9 male connector for the PLC.
4. Pin Configuration: The DOP-FX cable is typically a cross-over cable, which means the transmit and receive pins are crossed to ensure proper communication:
   • HMI (DB9) Pin 2 ↔ PLC (DB9) Pin 3 (Receive to Transmit).
   • HMI (DB9) Pin 3 ↔ PLC (DB9) Pin 2 (Transmit to Receive).
   • HMI (DB9) Pin 5 ↔ PLC (DB9) Pin 5 (Ground to Ground).

Key Considerations delta hmi to mitsubishi plc communication cable

1. Compatibility:
   • The DOP-FX cable is suitable for use between Delta DOP series HMIs and DVP-FX or FX series PLCs. Ensure your models are compatible before use.
2. Cable Length:
   • Typically 1.5 to 3 meters in length, which is sufficient for most installation scenarios where the PLC and HMI are mounted nearby.
3. Communication Parameters:
   • Ensure that the communication settings (e.g., baud rate, data bits, stop bits, parity) are the same on both the HMI and PLC. You can set these parameters using the programming software for both devices.

Programming Software:

• Delta DOPSoft: Use DOPSoft software to program and configure the Delta DOP series HMI.
• Delta WPLSoft or ISPSoft: Use WPLSoft or ISPSoft to program the DVP-FX series PLC.
• Set the correct COM port parameters to match the PLC and HMI settings for successful communication.

The DOP-FX cable is an RS-232 cable used for communication between Delta DOP series HMIs and DVP-FX series PLCs. It features DB9 connectors at both ends, with a cross-over pin configuration to facilitate data exchange. Proper configuration of communication parameters, such as baud rate and parity, is crucial to establish a successful link between the PLC and HMI.

Others Cable