DVPCAB215 delta dvp plc programming cable

Description

The DVPCAB215 delta dvp plc programming cable is used for communication between a Delta PLC and a PC for programming, monitoring, and diagnostics. It specifically connects the USB port of the PC to the RS232 serial communication port of the Delta DVP series PLCs. This cable is compatible with Delta’s DVP series PLCs and is used with WPLSoft or ISPSoft software for programming tasks. If you need DVPCAB215 Price in BD or delta plc programming cable Price in BD you can contact BAT Power Solution Via Call/WhatsApp: +8801713722455

Key Features of DVPCAB215 delta dvp plc programming cable

1. USB to RS232 Communication:
   • The DVPCAB215 cable converts the USB signal from the PC into an RS232 signal for the PLC, enabling direct communication with Delta DVP PLCs.
2. Driver Installation:
   • The cable requires a USB driver that installs a virtual COM port on your PC. This virtual port is used by the Delta programming software to communicate with the PLC.
   • The driver can typically be found with the cable or downloaded from Delta’s official website.
3. Plug-and-Play:
   • Once the driver is installed, the cable offers easy plug-and-play functionality, enabling smooth communication between the PC and the PLC for programming and diagnostics.

Supported Delta Devices

• Delta DVP Series PLCs:
  • DVP-SS2
  • DVP-SX2
  • DVP-SA2
  • DVP-EH2
  • DVP-ES2
  • And other models within the Delta DVP series that support RS232 communication.

Connection Setup of DVPCAB215 delta dvp plc programming cable

1. Connect the USB end of the DVPCAB215 cable to the USB port on your PC.
2. Install the USB driver (if not automatically installed) to create a virtual COM port.
3. Connect the RS232 end of the cable to the RS232 port on the Delta DVP PLC.
4. Open WPLSoft or ISPSoft on your PC.
5. In the software, select the correct virtual COM port created by the driver.
6. Set the proper communication parameters (baud rate, stop bits, etc.) to match the settings on the Delta PLC.
7. You can now download/upload programs, monitor the PLC, or perform diagnostics.

Supported Software

• WPLSoft (for DVP series PLC programming)
• ISPSoft (for more advanced programming and configuration)

Others Cable