GT01 C30R4 8P Mitsubishi PLC to HMI Communication Cable

Description

The GT01 C30R4 8P Mitsubishi PLC to HMI Communication Cable is a communication cable used to connect Mitsubishi PLCs to Mitsubishi HMIs (Human-Machine Interfaces), specifically for the GOT1000 or GOT2000 series HMIs. This cable facilitates communication between the PLC and the HMI for data exchange, programming, monitoring, and control. If you need to GT01-C30R4-8P Mitsubishi PLC to HMI Communication Cable Price in Bangladesh You can Contact BAT Power Solution Via email/WhatsApp: +8801713722455/+8801911300632.

Key Features GT01 C30R4 8P Mitsubishi PLC to HMI Communication Cable

1. PLC-to-HMI Communication:
   • The GT01-C30R4-8P cable allows for direct communication between Mitsubishi’s FX series PLCs and GOT series HMIs.
   • The HMI can be used to monitor and control the PLC’s operations, display data, and interact with the PLC’s ladder logic programs.
2. Pin Configuration:
   • The cable has an 8-pin mini-DIN connector on the PLC side and a DB9 connector (RS422) on the HMI side, allowing for a straightforward connection.
   • It supports RS422 communication, which is a robust protocol suitable for industrial environments.
3. Compatibility:
   • The GT01-C30R4-8P is compatible with Mitsubishi FX series PLCs (like FX1N, FX2N, FX3U, etc.) and GOT series HMIs, including GOT1000 and GOT2000 models.
4. Length:
   • The cable is generally 3 meters long, providing sufficient length for most installation scenarios between the PLC and HMI.

Applications

• Data Monitoring: The cable allows the HMI to read real-time data from the PLC, display status indicators, and show process information.
• Control: Operators can use the HMI to control the PLC’s outputs, adjust settings, and interact with various functions of the control system.
• Programming: The cable facilitates the transfer of programs between the HMI and the PLC, allowing for easy setup and configuration.

Connection Setup of GT01 C30R4 8P Mitsubishi PLC to HMI Communication Cable

1. Connect the 8-pin mini-DIN side to the Mitsubishi FX series PLC.
2. Connect the DB9 connector to the RS422 port on the GOT series HMI.
3. Configure communication settings (e.g., baud rate, station number) in both the HMI and the PLC using Mitsubishi’s software, such as GT Works3 for the HMI and GX Developer or GX Works2/3 for the PLC.
4. Ensure that both the PLC and HMI are powered on and that the cable is securely connected.

Supported Mitsubishi Devices

• PLCs:
  • FX1N, FX2N, FX3U, and other FX series PLCs that have RS422 communication.
• HMIs:
  • GOT1000 series HMIs (e.g., GT1050, GT1055, GT1150, etc.).
  • GOT2000 series HMIs.

Important Considerations

• Ensure that the RS422 communication parameters (baud rate, data bits, stop bits, parity) match between the PLC and HMI to establish a stable connection.
• If you are using the GX Works2 software for the PLC and GT Works3 for the HMI, make sure to correctly configure the communication channel to enable proper data exchange between the devices. Others Cable