Siemens 6ES7134 4GB01 0AB0

5.00 out of 5

(1 customer review)

Category: Module Tags: 134 4gb01 0ab0, 4gb01 0ab0, 6es7 134 4gb01, 6es7134 4gb01 0ab0, Siemens PLC Module 4gb01

Description
Reviews (1)

Description

The Siemens 6ES7134 4GB01 0AB0 is a 02 two Analog input, module of ET200S series CPU, this part number has 2AI Standard I-2DMU 15 mm width, 4… 20mA; 13 bit for 2-wire transducer Cycle time 65ms & channel with SF LED (group fault), For download datasheet Siemens 6ES7134 4GB01 0AB0.

Specification of Siemens 6ES7134 4GB01 0AB0

Part	6ES7134-4GB01-0AB0
General information
Product function
● Isochronous mode	No
Supply voltage
Load voltage L+
● Rated voltage	24V DC From Power Module
● Reverse polarity protection	Yes
Input current
from load voltage L+ (without load), max.	80 mA
from backplane bus 3.3 V DC, max.	10 mA
Power loss
Power loss, typ.	0.6 W
Address area
Address space per module
● Address space per module, max.	4 byte
Analog inputs
Number of analog inputs	2
permissible input current for current input (destruction limit), max.	40 mA
Cycle time (all channels) max.	Number of active channels per module x basic conversion time
Input ranges (rated values), currents
● 4 mA to 20 mA	Yes; on 50 ohms
Cable length
● shielded, max.	200 m
Analog value generation for the inputs
Measurement principle	integrating
Integration and conversion time/resolution per channel
● Resolution with overrange (bit including sign), max.	13 bit; 4 to 20 mA: 13 bit
● Integration time (ms)	16,7 / 20 ms
● Interference voltage suppression for interference frequency f1 in Hz	50 / 60 Hz
● Conversion time (per channel)
	65 ms; 55 / 65 ms
Smoothing of measured values
● parameterizable	Yes; In four stages by means of digital filtering
● Step: None	Yes; 1x cycle time
● Step: low	Yes; 4x cycle time
● Step: Medium	Yes; 32x cycle time
● Step: High	Yes; 64x cycle time
Errors/accuracies
Operational error limit in overall temperature range
● Current, relative to input range, (+/-)	0.60%
Basic error limit (operational limit at 25 °C)
● Current, relative to input range, (+/-)	0.40%
Interrupts/diagnostics/status information
Diagnoses
● Wire-break	Yes
● Group error
● Overflow/underflow
Diagnostics indication LED
● Group error SF (red)	Yes
Parameter
Remark	4 byte
Group diagnostics	Disable / enable Disable / enable
Overflow/underflow
Potential separation
Potential separation analog inputs
● between the channels	No
● between the channels and backplane bus	Yes
● Between the channels and load voltage L+	No
Isolation
Isolation tested with	500 V DC
Dimensions
Width	15 mm
Height	81 mm
Depth	52 mm
Weights
Weight, approx.	40 g